The new ErP 2021 compliant suspended LX range of unit heaters from Powrmatic benefits from fully modulating burner technology with reduced NOx levels whilst keeping the same construction, size and build quality of its LNVx predecessor.
Decarbonise large industrial spaces with the Eeco-x Heat Pump—an efficient solution for year-round heating and cooling. Featuring Smart Jet technology and low-GWP refrigerant R32, it reduces energy costs while maximising comfort. Available in 15kW and 30kW models, the Eeco-x Heat Pump supports your journey to Net Zero by seamlessly integrating with renewable energy systems.
The Powrmatic AirRoteX Series is a new generation of air rotation climate systems, offering powerful, efficient, and sustainable temperature control for large-scale warehouses, logistics hubs, manufacturing sites, and more. Available in electric, gas, and hybrid configurations, and hydrogen-ready, the AirRoteX adapts to your evolving energy needs—helping you meet today’s decarbonisation goals and prepare for tomorrow’s energy landscape.
The all new Powrmatic EUX Electric Unit Heater – the perfect heating solution for industrial and commercial buildings. This energy-efficient heater not only provides powerful heating but also helps reduce your carbon footprint by using electricity available from 5kW to 40kW.
The NOVA® family of products has been specifically designed to meet the requirements for multi-functional applications serving a variety of fuels.
Sigma has been specifically designed as a connecting flue pipe to facilitate the connection between a multi-fuel appliance and either an existing brick chimney or a prefabricated twin wall system chimney.
S-Flue has been specifically designed to meet the requirements for multi-fuel appliances that operate under negative or neutral draught conditions. Under no circumstances should Sflue be used on appliances that generate high levels of condensation or positive pressure within the chimney system
The SUPRA Plus chimney system range is specifically designed to meet the demands of the latest high efficiency condensing heating appliances.
The ErP 2021 compliant floor standing VX range of cabinet heaters from Powrmatic benefits from the same design as the popular VPx range in its entire construction, performance, and aesthetics, finished with the popular epoxy powder RAL 7015 stove baked paint with six models in the range between 35kW and 140kW
Powrmatic’s new ErP compliant CPx range of cabinet type heaters combine installation versality with a range of Kw outputs to match the most stringent applications. The range can be installed in the heated space, be sited in plant rooms and specified for either vertical or horizontal installation. The CPx EA range can also be specified for external applications.
Powrmatic’s ErP 2021-compliant CX range of cabinet-type heaters combines installation versatility with a range of kW outputs to match the most stringent applications. The new CX features the new modulating ultra-low NOx INVERTERJET® from BurnerTech
.The OUH range of Oil Unit Heaters are indirect oil fired suspended warm air heaters with a stainless steel heat exchanger as standard and a downwards high/low firing pressure jet oil burner. The OUH range of oil fired unit heaters is comprised of 4 models with outputs ranging from 20kW to 60kW.
The Powrmatic TEx range of gas and oil-fired air rotation heaters are specifically designed for the efficient heating of large areas and are especially suitable for open plan warehousing and manufacturing facilities. Our air rotation units utilise high efficiency axial fans to move large volumes of air. These heaters achieve uniformity in the distribution of heated air that cannot be matched by conventional units that treat low volumes of air at high temperature.
The range of Linear U-Tube Forced & Vacuum Burner Heaters Superior Radiant Products (SRP®) from Powrmatic feature optimal comfort and energy savings with two-stage technology. High/low capability allows for quicker recovery on the high fire and economical steady operation on the low fire with either U-Tube, Single and Double Linear configurations.
The PL Linear & PU U-Tube Radiant Heaters Superior Radiant Products (SRP®) from Powrmatic feature optimal comfort and energy savings with two-stage technology. High/low capability allows for quicker recovery on the high fire and economical steady operation on the low fire with either U-Tube or Single Linear configurations.
The SRP PVDL Vacuum Double Linear Radiant Heater – Superior Radiant Products (SRP®) from Powrmatic feature optimal comfort and energy savings with two-stage technology. High/low capability allows for quicker recovery on the high fire and economical steady operation on the low fire with Double Linear configurations.
The PVL Vacuum Linear & PVU U-Tube Radiant Heaters Superior Radiant Products (SRP®) from Powrmatic feature optimal comfort and energy savings with two-stage technology. High/low capability allows for quicker recovery on the high fire and economical steady operation on the low fire with either U-Tube, Single Vacuum Linear configurations.
Providing installers and specifiers even greater flexibility, Powrmatic has introduced a combined multi-burner herringbone system to complement the range of Linear and U-Tube radiant heaters with up to 200kW capacity eliminating the number of roof penetrations. Multiple individual heater exhausts will be combined in a single aluminium manifold system and flued through an outside wall or roof.
With the introduction to the UK market of the Tub-One radiant strip system Powrmatic continues to lead the industry with this proven highly efficient Impresind product, with its state–of–the–art design, patented tube assembly technique and recirculation system maintaining a constant temperature of the radiant tubes. The Tub-One range has combustion units from; 35 to 300kW providing heat coverage circuit lengths of 20m, suitable for small installations up to 130m for larger facilities.
The new ETL approved continuous radiant tube system from Powrmatic & SRP continues to the lead the industry with it’s innovative, patented, value-added and feature-rich, position tuned, high-efficiency continuous Premier Vacuum radiant systems.
The PSDE range of high intensity gas fired radiant plaque heaters from Powrmatic provided efficient and directed, cost-effective heat for cold spots in industrial and commercial applications from 9-48Kw models available.
The SQ range is an advanced infrared heating solution ideal for large spaces. With up to 90% energy savings, it delivers efficient, instant warmth. Perfect for factories and warehouses the SQ range combines sleek design with superior performance, ensuring cost-effective and eco-friendly heating.
Baratherm units provide a high velocity door air curtain. The air stream is not heated and will assist in preventing air movement out from the space and thereby reduce energy costs. The high air velocity stream will also reduce the ingress of air bourne contaminants and insects into the space.
The range of Powrmatic’s GFAC gas-fired door curtain is designed to provide an effective solution to energy loss and draughts adjacent to loading doors. The GFAC Door curtains provide a solution; it produces a targeted high-velocity air stream across the door to significantly reduce the amount of warm air escaping and cold air entering.
The Powrmatic WX water heater is a new generation of devices combining innovative technical solutions with a modern pattern design for industrial and commercial applications.
Powrmatic CECx is a high velocity heat recovery unit with low running costs and requiring minimal maintenance. The CECx is designed for higher level mounting and will automatically recirculate high level hot air, reducing stratification and associated heat losses. CECx fans are specifically designed to lower the fuel consumption of space heating systems and at the same time, improve comfort levels.
HCF low velocity impeller de-stratification fans are specifically designed to lower the fuel consumption of space heating systems. The gentle displacement of warm air from roof level down into the working zone converts wasted heat into useful heat reducing fuel consumption.
The SUPRA Plus Single Wall Flue System range is specifically designed to meet the demands of the latest high efficiency condensing heating appliances. The system is supplied complete with factory fitted and bonded elastomer seals, offering peace of mind and reduced installation time for the installer.
The new ErP 2021 ready HEMx Gas fired heat exchange modules benefits from lower NOx levels and a new easy-access control panel. Its compact design and flexible configuration are able to provide designers with efficient and cost-effective solutions for a wide variety of air heating and drying applications including new and refurbished air handling units, duct heaters and dryers.
The CP+ range has been designed with a range of outputs up to 1MegaWatt, and is ideal for heating large factory and warehouse spaces. Heaters are available with a comprehensive range of oil, natural gas, lpg and liquid biodiesel fired burners. A Powrmatic control unit is supplied with every heater.
The large kW output CPx range of cabinet type heaters combine installation versatility with a range from 360kW to 590kW outputs to match the most stringent applications. The range can be installed in the heated space, be sited in plant rooms and specified for either vertical or horizontal installation. The CPx EA range can also be specified for external applications.
Our louvred AOV Opensky is a natural and smoke ventilator perfect for comfort ventilation or as part of a SHEV (smoke and heat exhaust ventilation) system. The AOV Opensky is available in a range of dimensions, control operations and finishes making it suitable for a wide range of applications.
The Krystalite AOV glazed lovered smoke vent is our most advanced architectural smoke and natural ventilator which combines aesthetics, function and fire safety for facade building integration.The aesthetically pleasing product matches modern day design with high performance. Making it a perfect cost effective solution for replacing window systems whilst adding the ability of smoke ventilation.
The MC200 is a digital, high specification controller for individual heaters which provides the flexibility of variable time and temperature control with optimum start/stop with weather compensation, adjustable frost protection, remote burner reset and summer fan-only operation as standard.
The Stirling AOV Casement Ventilator is a SHEV smoke and natural EN-12101-2 tested ventilator which has been specifically designed to meet both the functional and aesthetic demands of the modern construction industry and provides the perfect blend of performance, versatility and aesthetics.
The MC300 Multi is a digital, high specification controller for multiple unit heaters which provides the flexibility of variable time and temperature control with optimum start/stop with weather compensation, adjustable frost protection, remote burner reset and summer fan-only operation as standard.
The Ultrasky AOV vent is a high quality glazed ventilator designed for both smoke and natural ventilation requirements, tested to BS EN12101-2. Its extremely low air permeability characteristics, low profile and aesthetic features offer the ideal solution for modern buildings. Ultrasky has been specifically designed for seamless integration into inclined and vertical glazing systems.
The Multisky is a fully weathered AOV ventilator specifically developed for smoke and natural ventilation for industrial applications combining the EN Tested Roof Opensky with our industrial Mutli-Purpose Ventilator with side dampers for fully weathered natural ventilation.
The new Vision Compact is the perfect solution for when space is at a premium. The Compact measures just 810mm wide and fits narrow spaces or under windows for constraint areas. It’s the first fixed double duct air conditioner to use R290 (propane) gas giving an impressive cooling & heating capacity with a low environmental impact.
The Powrmatic Vision Range is a packaged solution which removes the need for an outdoor unit, and incorporates state of the art “monobloc” technology. The Vision also does not require a F-Gas certified engineer to install saving you as significant amount on installation costs.
The Vision 4.1kW is the most powerful model in the Powrmatic Vision range, delivering robust heating and cooling performance without the need for an external condenser. Ideal for larger hotel rooms, care homes, offices, and residential spaces, it offers a discreet, efficient solution where external units are not permitted or desired.
The Vision VertiCool 3.1kW is the latest in the range with a new and stylish vertical approach that can be installed in areas between windows, or in room corners making it the perfect alternative for those rooms where space and access to an external low or high wall is limited. The VertiCool is installed the same as the standard unit with an impressive depth of only 185mm allow it to integrate seamlessly into any room.
The Vision Horizontal is 3.1kW, compact ceiling-mounted air conditioner requiring no external unit. Using eco-friendly R32 refrigerant and measuring just 25.5 cm high, it’s perfect for spaces where wall units aren’t an option. It’s integrated electric heater offers adjustable 900W or 1800W settings for year-round comfort.
The new AIRCO290 from Powrmatic is an affordable and economical air conditioning for homes, offices, hotels and garden rooms with rapid installation and minimalistic design utilising environmentally safe R290 gas without needing any outdoor condenser built and ready for the UK, European and American markets.
Powrmatic have brought the TBS 580i evaporative cooler to the HVAC market. This evaporative cooler delivers cool, 100% fresh air, at much lower costs than refrigerated cooling methods. Evaporative cooling is fast becoming the only viable option for cooling large areas. A CPQ system can typically use less energy than refrigerated cooling systems.
The PJe Powrjet Extract Fan is designed for high-performance ventilation in the most extreme industrial settings. Built to handle high temperatures, dense smoke, and airborne contaminants, the PJe delivers powerful and reliable extraction for a wide range of building applications.
The PVe powered extract ventilator is designed for exhaust ventilation for various premises that require reasonable energy saving solutions and controlled ventilation systems. The range has excellent weathering characteristics and is contoured to provide the maximum performance. PVe is suitable for either roof or wall mounting and designed for effective performance across a variety of demanding conditions providing fully weathered ventilation through a wide range of sizes.
The PJe Powrjet Extract Fan is designed for high-performance ventilation in the most extreme industrial settings. Built to handle high temperatures, dense smoke, and airborne contaminants, the PJe delivers powerful and reliable extraction for a wide range of building applications.